Dental Sedation Lincoln

CREATING BEAUTIFUL SMILES LINCOLN

Dental Sedation Lincoln

CREATING BEAUTIFUL SMILES LINCOLN

Dental Sedation Lincoln

CREATING BEAUTIFUL SMILES LINCOLN

Dental Sedation Lincoln

CREATING BEAUTIFUL SMILES LINCOLN

Dental Sedation Lincoln

CREATING BEAUTIFUL SMILES LINCOLN

Dental Sedation Lincoln

We can offer adult patients who are anxious about dental treatment the opportunity to have their treatment carried out under intravenous sedation. This involves an injection into the arm or back of the hand of a drug known as midazolam which relaxes the patient into their position where they are relaxed enough to allow dental treatment to be undertaken.

Once the patient is relaxed the areas involved are numbed with local anaesthetic and dental treatment is carried out. Another advantage of midozalam sedation is that most patients do not tend to remember much about the dental treatment that they have just had.

Book an Appointment Dental Referral Treatment Fees

Frequently Asked Questions About Dental Sedation Lincoln

AirFlow® cleaning is a type of air polishing. Air polishing uses a mixture of water and powder, delivered under pressure and directed at the teeth to remove plaque, calculus and staining.

No. AirFlow® or any other type of air polishing does not hurt.

The effects of stain removal could last up to 12 months. This time is reduced if you consume food and drinks that cause staining, if you use a chlorhexidine mouthwash or if you are a smoker.

Scaling using a traditional ultrasonic and polishing with a rubber cup with paste will also remove plaque, calculus and staining. Professional tooth whitening will lighten the colour of your teeth.

Air polishing, also known as powder polishing or air abrasion, is a modern dental cleaning technique that uses a combination of compressed air, water, and a fine abrasive powder to gently remove stains, plaque, and soft deposits from the tooth surfaces.

Cleaning Process

Pressurised Powder Delivery

The air polishing device delivers a controlled stream of the powder mixture through a specialised handpiece or nozzle. The powder, typically consisting of sodium bicarbonate or glycine, is propelled by compressed air and water, creating a gentle yet effective cleaning action on the teeth.

Stain and Plaque Removal

Gentle Abrasive Action

The fine abrasive particles in the powder gently scrub away stubborn stains, discolouration, and soft deposits that can accumulate on the tooth surfaces over time. This process effectively removes external stains caused by factors such as smoking, coffee, tea, or certain foods, leaving the teeth looking brighter and cleaner.

Versatile Application

Suitable for Various Dental Surfaces

Air polishing can be used on a variety of dental surfaces, including natural teeth, dental restorations (fillings, crowns, bridges), and orthodontic appliances like braces. Its gentle nature makes it a safe and effective cleaning method for various dental materials, ensuring a thorough yet gentle cleaning experience.

Targeted Cleaning

Precision and Control

The air polishing handpiece allows dentists or hygienists to precisely target specific areas of the mouth, ensuring a focused and controlled cleaning process. This level of precision minimises the risk of damaging surrounding soft tissues or dental work while effectively removing stains and deposits.

Air polishing has become increasingly popular in dental practices due to its effectiveness, convenience, and patient-friendly nature. Many patients appreciate the gentle and efficient cleaning experience provided by this modern dental technology.

Air polishing is a gentle yet effective dental cleaning technique that harnesses the power of compressed air, water, and a fine abrasive powder to remove stains, plaque, and soft deposits from the tooth surfaces. Here’s how it works:

Powder Delivery System

Compressed Air and Water

The air polishing device consists of a handpiece connected to a unit that delivers compressed air and a continuous stream of water. The abrasive powder, typically made of sodium bicarbonate or glycine, is loaded into a reservoir within the unit.

Powder Propulsion

Controlled Spray

When the handpiece is activated, the compressed air and water create a powerful yet controlled spray that propels the fine abrasive powder onto the tooth surfaces. The combination of air, water, and powder creates a gentle polishing action that effectively removes stains, plaque, and soft deposits.

Abrasive Action

Gentle Scrubbing Effect

The abrasive particles in the powder gently scrub the tooth surfaces, dislodging and removing stubborn stains, discolouration, and soft deposits. The air and water help to flush away the loosened debris, ensuring a thorough cleaning experience without causing damage to the teeth or gums.

Precise Application

Targeted Cleaning

The air polishing handpiece allows dentists or hygienists to precisely target specific areas of the mouth, ensuring a focused and controlled cleaning process. They can adjust the angle, pressure, and distance of the spray to effectively clean hard-to-reach areas or target specific stains or deposits.

Adjustable Settings

Customisable for Patient Comfort

Many air polishing devices offer adjustable settings for powder flow, air pressure, and water flow, allowing the dental professional to customise the cleaning experience based on the patient’s needs and preferences. This ensures a gentle and comfortable treatment while maintaining optimal cleaning effectiveness.

The air polishing process is typically quick, efficient, and comfortable for patients, making it a popular choice for routine dental cleaning and stain removal procedures in modern dental practices.

Yes, air polishing is considered a safe and effective dental cleaning technique when performed by a trained dental professional following proper protocols and precautions.

Non-Abrasive Powder

Gentle Particles

The abrasive powders used in air polishing, such as sodium bicarbonate or glycine, are specially formulated to be gentle on tooth enamel and dental restorations. Unlike traditional abrasive polishing materials, these powders are designed to effectively remove stains and soft deposits without causing excessive wear or damage to the tooth surfaces.

Controlled Pressure

Precise Application

Air polishing devices allow dental professionals to precisely control the pressure and flow of the air-powder mixture. This level of control minimises the risk of over-abrasion or damage to the teeth, gums, or surrounding soft tissues. Skilled practitioners can adjust the settings to suit each patient’s individual needs and oral conditions.

Protective Measures

Patient and Practitioner Safety

During an air polishing treatment, both the patient and the dental professional wear protective equipment, such as safety glasses or shields, to prevent any powder particles from entering the eyes. Additionally, suction devices are used to capture and remove any excess powder and debris, ensuring a clean and controlled environment.

Contraindications

Precautions for Certain Conditions

While air polishing is generally safe, there are certain contraindications where it may not be recommended or may require additional precautions. These include:

– Individuals with respiratory conditions or allergies to the powder ingredients
– Patients with exposed root surfaces or severe gum recession
– Those with certain dental restorations or orthodontic appliances that could be potentially damaged by the abrasive action

Your dentist or hygienist will carefully evaluate your oral health conditions and discuss any potential risks or precautions before proceeding with an air polishing treatment. By following proper protocols and considering individual patient factors, air polishing can be a safe and effective dental cleaning procedure.

Air polishing offers several benefits compared to traditional dental cleaning methods, making it a popular choice among dental professionals and patients alike. Here are some key advantages of air polishing:

Effective Stain Removal

Brighter, Whiter Smile

One of the primary benefits of air polishing is its ability to effectively remove stubborn stains and discolouration from tooth surfaces. The gentle abrasive action of the powder effectively targets and lifts extrinsic (external) stains caused by factors like coffee, tea, red wine, and tobacco, leaving your teeth looking brighter and whiter.

Gentle on Tooth Enamel and Restorations

Minimising Abrasion

The fine, non-abrasive powders used in air polishing are designed to be gentle on tooth enamel and dental restorations like fillings, crowns, and veneers. This minimises the risk of excessive wear or damage to these surfaces, making air polishing a safer alternative to traditional scaling and polishing methods that may involve more abrasive instruments.

Thorough Cleaning

Reaching Hard-to-Access Areas

The air polishing handpiece allows dental professionals to precisely target and clean hard-to-reach areas of the mouth, such as the tight spaces between teeth or around orthodontic appliances like braces. This ensures a more thorough and comprehensive cleaning experience compared to traditional methods.

Time-Efficient Procedure

Faster Treatment Time

Air polishing is generally a time-efficient procedure, allowing dental professionals to effectively clean and polish multiple teeth in a relatively short amount of time. This can translate to shorter appointment times for patients, making the process more convenient and comfortable.

Improved Patient Experience

Comfortable and Minimally Invasive

Many patients find air polishing to be a more comfortable and minimally invasive experience compared to traditional scaling and polishing methods. The gentle nature of the powder and the absence of loud or uncomfortable scraping sounds can help alleviate dental anxiety and make the cleaning process more pleasant overall.

With its ability to effectively remove stains, its gentle action on tooth surfaces, and its time-efficient and comfortable nature, air polishing offers numerous benefits that contribute to improved oral health and a more enjoyable dental cleaning experience.

Air polishing is a more modern and advanced dental cleaning technique that offers several advantages over traditional scaling and polishing methods. Here’s how they compare:

Cleaning Action

Abrasive Particles vs. Manual Instruments

Traditional scaling and polishing rely on manual instruments like scrapers, curettes, and ultrasonic scalers to physically remove plaque, tartar, and stains from tooth surfaces. In contrast, air polishing uses a controlled stream of air, water, and fine abrasive particles to gently dislodge and lift away these deposits.

Enamel Preservation

Minimising Abrasion

The abrasive powders used in air polishing, such as sodium bicarbonate or glycine, are specifically formulated to be gentle on tooth enamel and dental restorations. Traditional scaling can potentially cause microscopic scratches or excessive wear on tooth surfaces, especially if not performed with proper technique.

Precision and Access

Targeted Cleaning

The air polishing handpiece allows for precise and controlled cleaning, enabling dental professionals to target specific areas or hard-to-reach spots more effectively. Manual scaling instruments can sometimes struggle to access tight spaces or areas around orthodontic appliances.

Treatment Time

Efficiency

Air polishing is generally a faster and more time-efficient procedure compared to traditional scaling and polishing. The latter can be more time-consuming, especially for patients with significant plaque or tartar buildup.

Patient Experience

Comfort and Sensitivity

Many patients find air polishing to be a more comfortable and less invasive experience compared to traditional scaling, which can sometimes cause discomfort or sensitivity, especially for those with exposed root surfaces or gum recession.

Stain Removal

Brighter Smile

Air polishing is particularly effective at removing stubborn extrinsic (external) stains, leaving teeth looking brighter and whiter. Traditional scaling may not be as effective at lifting and removing deeply embedded stains.

While both techniques aim to achieve clean and healthy teeth, air polishing offers several advantages in terms of gentleness, precision, efficiency, and patient comfort, making it an increasingly popular choice in modern dental practices.

Yes, air polishing is highly effective in removing stains and discoloration from tooth surfaces, leaving teeth looking brighter and whiter.

Extrinsic Stain Removal

Tackling External Discoloration

Air polishing is particularly adept at removing extrinsic stains, which are external discolorations that occur on the outer surface of the tooth enamel. These stains can be caused by various factors, such as consumption of coffee, tea, red wine, tobacco, and certain foods or beverages. The gentle abrasive action of the air-powder mixture effectively lifts and dislodges these stubborn surface stains.

Abrasive Powder Formulation

Effective Stain-Removing Properties

The fine abrasive powders used in air polishing, typically sodium bicarbonate or glycine, are specially formulated to effectively target and remove stains without causing excessive wear or damage to the tooth enamel or dental restorations. These powders have stain-removing properties that make them highly effective at restoring the natural whiteness of teeth.

Precision and Access

Targeted Cleaning

The air polishing handpiece allows dental professionals to precisely target specific areas or hard-to-reach spots where stains may accumulate. This level of precision ensures that even stubborn or localized discoloration can be effectively addressed during the cleaning process.

Complementary Whitening Treatments

Enhancing the Effects

While air polishing effectively removes extrinsic stains, it can also be combined with other professional whitening treatments for optimal results. By first removing surface stains through air polishing, subsequent whitening procedures may be more effective in addressing any intrinsic (internal) discoloration or deeper staining.

With its gentle yet powerful cleaning action, air polishing has become a popular choice for removing unsightly stains and discoloration, leaving patients with a brighter, more radiant smile. However, it’s important to note that air polishing may not be as effective for removing intrinsic stains caused by factors like tooth trauma or certain medications.

Air polishing is a safe and effective method for removing stains and polishing teeth, but it’s not suitable for all individuals. There are certain circumstances where it may not be recommended or may require special precautions.

Dental Sensitivity

Exposed Tooth Surfaces

Individuals with exposed root surfaces or dental sensitivity may experience discomfort during an air polishing treatment. The abrasive nature of the polishing powder can sometimes irritate sensitive areas of the teeth or gums. However, experienced dental professionals can adjust the air pressure and powder flow to minimize any potential discomfort.

Dental Restorations

Fillings, Crowns, and Veneers

Air polishing is generally safe for use on natural tooth surfaces, but it may not be suitable for certain types of dental restorations. The abrasive powder could potentially cause wear or roughen the surfaces of fillings, crowns, or veneers. Your dentist will assess the condition and compatibility of your restorations before recommending air polishing.

Gum Health

Periodontal Disease

Individuals with active gum disease or periodontitis may not be suitable candidates for air polishing. The air pressure and abrasive powder could potentially irritate or damage already compromised gum tissues. In such cases, your dentist may recommend alternative cleaning methods or addressing the gum condition first before considering air polishing.

Medical Conditions

Respiratory Issues

Patients with respiratory conditions, such as asthma or chronic obstructive pulmonary disease (COPD), may need to take extra precautions during air polishing. The fine powder used in the procedure could potentially aggravate respiratory issues if inhaled. Your dentist will evaluate your medical history and may recommend alternative cleaning methods if necessary.

It’s essential to discuss your individual circumstances with your dentist, who can assess your specific needs and determine whether air polishing is a suitable option for you. In some cases, modifications or alternative cleaning methods may be recommended to ensure your safety and comfort during the treatment.

While air polishing is generally considered a safe and effective dental cleaning method, there are certain precautions and considerations to keep in mind regarding potential damage to teeth or gums.

Tooth Enamel

Abrasive Wear

The air polishing procedure uses a fine abrasive powder, typically sodium bicarbonate or glycine, to remove stains and plaque from tooth surfaces. If used improperly or excessively, these abrasive particles can potentially cause wear or erosion of the tooth enamel over time. However, when performed by a trained dental professional, following the appropriate guidelines and techniques, the risk of enamel damage is minimal.

Dental Restorations

Roughening or Wear

Dental restorations, such as fillings, crowns, or veneers, may be more susceptible to roughening or wear from the abrasive powder used in air polishing. While air polishing is generally safe for natural tooth surfaces, it’s essential to exercise caution when cleaning around restorations to avoid potential damage or compromising their integrity.

Gum Irritation

Soft Tissue Sensitivity

In some cases, the high-pressure air and abrasive powder used during air polishing can potentially irritate or cause temporary inflammation of the gum tissues, especially in individuals with sensitive gums or pre-existing gum conditions. Experienced dental professionals adjust the air pressure and powder flow to minimize any potential discomfort or irritation.

Professional Expertise

Proper Technique and Precautions

The risk of damage to teeth or gums during air polishing is significantly reduced when the procedure is performed by a skilled and experienced dental professional. They are trained to use the appropriate techniques, adjust the equipment settings, and take necessary precautions to ensure a safe and effective treatment tailored to each patient’s specific needs.

Overall, while there are potential risks associated with air polishing, these risks are minimized when the treatment is performed by a qualified dental professional following established guidelines and protocols. Regular professional cleanings, combined with proper at-home oral hygiene practices, can help maintain optimal oral health while minimizing the risk of any damage to teeth or gums.

The frequency of air polishing treatments can vary depending on individual circumstances and oral health needs. However, most dental professionals recommend getting an air polishing treatment as part of regular professional dental cleanings.

Standard Recommendation

Routine Dental Visits

For individuals with generally good oral health, air polishing can be performed during regular dental checkups and cleanings, typically every six months. This aligns with the widely recommended frequency for routine dental visits, allowing for thorough cleaning and polishing of teeth to maintain optimal oral hygiene.

Increased Frequency

Higher Risk Factors

In certain cases, your dentist may recommend more frequent air polishing treatments, potentially every three to four months. This increased frequency may be advised for individuals with a higher risk of plaque buildup, staining, or gum disease due to factors such as smoking, poor oral hygiene habits, or specific dietary habits that contribute to staining.

Customized Approach

Personalized Dental Care

The ideal frequency for air polishing treatments should be tailored to your individual needs and circumstances. During your regular dental checkups, your dentist will assess your oral health, plaque accumulation, staining levels, and any specific risk factors. Based on this evaluation, they can provide personalized recommendations on how often you should have air polishing treatments to maintain optimal oral hygiene and a healthy, stain-free smile.

Professional Guidance

Expert Advice

It’s essential to follow the guidance and recommendations of your dentist or dental hygienist regarding the appropriate frequency for air polishing treatments. They have the expertise to determine the optimal schedule based on your unique oral health status, lifestyle factors, and overall dental care needs.

Remember, in addition to professional air polishing treatments, maintaining a consistent and thorough at-home oral hygiene routine, including brushing, flossing, and using recommended dental products, is crucial for maintaining optimal oral health between dental visits.

Air polishing is generally considered a comfortable and well-tolerated dental cleaning procedure. However, individual experiences may vary, and some patients may experience minor discomfort or sensitivity during the treatment.

Minimal Discomfort

Gentle Technique

Air polishing utilizes a gentle stream of air mixed with fine abrasive particles to remove surface stains and plaque from the teeth. Unlike traditional scaling methods, which involve scraping and more vigorous mechanical action, air polishing is a relatively gentle and non-invasive technique. Most patients report little to no discomfort during the procedure.

Sensitive Teeth

Temporary Sensitivity

Individuals with sensitive teeth or exposed root surfaces may experience some temporary sensitivity or mild discomfort during air polishing. The air pressure and abrasive particles can potentially cause a temporary tingling or zinging sensation in these sensitive areas. However, experienced dental professionals can adjust the air pressure and powder flow to minimize any potential discomfort.

Proper Technique

Professional Expertise

The level of comfort during an air polishing treatment largely depends on the skill and expertise of the dental professional performing the procedure. They are trained to use appropriate techniques, adjust the equipment settings, and take necessary precautions to ensure a comfortable experience for the patient. Following proper protocols and monitoring the patient’s feedback can help minimize any potential discomfort.

Gum Sensitivity

Tender Gum Tissues

Individuals with gum sensitivity or pre-existing gum conditions may experience some temporary discomfort or irritation during air polishing. The air pressure and abrasive particles can potentially cause temporary inflammation or tenderness in the gum tissues. However, skilled dental professionals can take precautions to protect the gums and adjust the treatment as needed to alleviate any discomfort.

Overall, while air polishing is generally well-tolerated, it’s essential to communicate any discomfort or sensitivity to your dental professional during the procedure. They can make adjustments or provide additional precautions to ensure a comfortable and pleasant experience for you.

General Dentistry Treatments

Dental Sedation

Dental Sedation

Dentures

Dentures

Dentures are removable appliances that are made for your mouth to replace missing teeth

Root Canal Treatment

Root Canal Treatment

This a dental procedure used to treat infection at the centre of a tooth

Hygiene

Hygiene

Dental hygiene is important to your oral health because it reduces your risk of developing tooth decay and gum disease

Fillings

Fillings

White or tooth coloured composite filling materials are made from a mixture of a resin base filled with glass type particles

Surgical Tooth Extraction

Surgical Tooth Extraction

In certain instances if a tooth cannot be saved then removal is required

Emergency Treatment

Emergency Treatment

Dental pain can affect your sleep and day to day life. It is always a good idea to get it treated as soon as possible

Bridge

Bridge

A bridge is a fixed dental restoration that replaces missing teeth

Crown

Crown

A dental crown is a tooth-shaped “cap” that is cemented over a tooth. It covers the tooth and restores its shape, size, strength and/or improves its appearance

Air Polish

Air Polish

Air-Flow is a professional stain removal system that tackles stubborn stains